Numeric Answers

Numeric answers are used when the response to a question is a number. A numeric answer consists of a Label, Type, Numeric type and Min (Minimum) and Max (Maximum) values.

Archivist Build / Response Domain (Numeric Answer):

Open

The numeric type is entered as either 'Integer' or 'Float'. Which type is chosen depends on the format of the response in the questionnaire. The numeric type ‘Float’ is used only if the response in the question contains a decimal point or requires a fraction (see examples). Min and Max values are always entered as whole numbers, regardless of the values indicated in the questionnaire.

For most numeric responses a generic answer labelled ‘How many’ is used, with a Numeric type of Integer and a Min value of 0 with the Max value left blank.

Archivist Build / Response Domain (How many):

Open

If an Integer and a Float numeric type answer are needed for the same numeric response in a questionnaire, separate response domains are made for each numeric type, adding ‘I’ for integer and ‘F’ for float to the label. In the example below, the questionnaire contains questions with a ‘How many’ response with and without a decimal point.

Questionnaire: SWS Initial Questionnaire

Questionnaire layout:

Open

Open

The ‘How many’ response to question 7.4b contains a decimal point, while the response to 8.4 does not. Two ‘How many’ numeric answers are created, one with a numeric type of Integer and one with a numeric type of Float.

Archivist Build / Response Domain:

How many Integer answer	How many Float answer
Open	Open

Archivist view (sws_1_bio):

Open

Open

Numeric answers with specific labels

 There are several types of numeric answers which are specifically labelled:

• Age-related numeric responses

• Physical measurements

• Quantities (generally food-related) 

• Numeric responses with min and/or max values defined in the question

• Date responses input as a numeric answer

• Time period (duration) responses input as a numeric answer

Note: Specifically labelled answers are not created for distance (i.e. miles), single unit time responses with no defined min or max in the documentation (i.e. hours only, minutes only), and measurements without a defined length or size (i.e. days, nights, slices, cups, mugs, etc.). These are all entered as a 'How many' response domain.

Age-related numeric answers

 Answers to ‘How old’ questions are entered as follows:

Measurements

Physical measurement responses with a defined length or size are input as labelled numeric answers regardless of whether the question response contains a single measurement (inches, cm, mm, kilos) or a compound measurement (… lbs … oz; … stones … lbs; … ft … in). The answer label for the measurement unit should be fully spelled out regardless of how it is written in the questionnaire.

When the answer is the second measurement in a compound response, the label is entered as ‘[X] in [Y]’, where [X] is the second part of the measurement and [Y] is first part. So for a response ‘… lbs … oz’ the label for the ‘oz’ numeric answer is ‘Ounces in pound’, with a Min of 0 and Max of 15 (for an integer response) or 16 (for a float response). For the response ‘… stones … lbs’ the label for the ‘lbs’ numeric answer is ‘Pounds in stone’, with a Min of 0 and Max of 13 (for an integer response) or 14 (for a float response).

Responses for medical measurements, e.g. blood pressure, peak expiratory flow rate, are labelled using the unit of measure recorded for the medical check, not the procedure itself. The numeric response for blood pressure is labelled Millimetres and does not need to be distinguished from Millimetres used as a physical measurement. The label for peak expiratory flow rate, used to assess lung capacity, is Litres per minute.

Temperature, whether of a person or a room, is input as a numeric answer only if the question specifies whether the response is in Celsius or Fahrenheit. The numeric response is labelled either Celsius or Fahrenheit depending on the unit indicated in the question. If a question regarding temperature does not specify a unit of measurement, the answer is input as a text response labelled Temperature. See discussion of insufficiently defined numeric responses in Text answers section.

Common measurement answers:

Quantities

Quantities which have a precise unit of measurement are entered as specifically labelled numeric answers. Tablespoons, teaspoons, fluid ounces (fl.ozs), centilitres (cls), millilitres (mls), and grams are examples of quantity responses that are entered as labelled numeric answers. Responses asking average amount per serving, no of cups/mugs of tea/coffee (see example ), glasses, spoons, slices, scoops, bananas, eggs, etc., where the serving size is variable (see example), are not entered as specifically labelled numeric answers. ‘How many’ is used as the answer for these types of quantities.

Common quantity answers: