Handwritten responses using Microsoft Lens

This guide explains how to add handwritten responses to your submission / answer sheet document using the Microsoft Lens app.

Additional and important steps for submitting handwritten work:

1. Complete your handwritten responses on a clean sheet of paper using a pen (do not use a pencil).

2. Take screenshots of your handwritten responses. The guidance below outlines the use of the Microsoft Lens app to scan from your mobile phone.

3. Transfer the images taken to your computer (it is best to use your computer cable to transfer the files).

4. Use the Insert option in MS word to insert images into your answer sheet.  It is recommended you use a blank Microsoft Word document as your answer sheet.

Note: You may wish to handwrite some responses and type others. Ensure that your responses are clearly labelled and that they are all compiled into a single document/file for submission.

Practise taking images of hand written notes and diagrams in advance of your assessment, so that you are familiar with the process.

What is Microsoft Lens?

This is a Microsoft app available on Android and iOS devices that turns your camera, tablet or other mobile device into a scanner.

If you have an assessment exercise that requires a drawn or handwritten answer, this allows you to make your sketch, diagram, chart or write text by hand, scan it and save it for use in a document or upload it as an image or PDF.

You take a picture of it with your mobile device and save in a convenient digital format for further use, including inserting into an Office document (such as Word, PowerPoint or Excel). The resulting document can then be submitted electronically.

Step 1: Download Microsoft Lens

1. Download the app from the following app stores.

   • Apple

   • Android

Open

Step 2: Open Office Lens

Once you have installed it, you simply open the app and point it at your image. The app has auto-focus (this may be dependent on your device) and edge recognition so that it will try to isolate rectangular regions of the image.

Open

You will need to practise focussing your device camera to get a good image in the correct orientation.

Step 3: Choose the mode

Office Lens has different modes suitable for different tasks. They will not all be suitable for your assessment tasks.

For anything handwritten, the Whiteboard mode is probably the best option.

Whiteboard

Whiteboard mode is suitable for taking a snap of a sketch, hand-drawn diagram, equation etc. Lens will adjust images so that backgrounds are not too bright and you can focus so as to make writing readable. This works well on both paper and whiteboards.

Document

This mode is designed to read machine-produced text. If the text is good enough quality you can use optical character recognition once it is captured.

Photo

This is for capturing photorealistic images of objects, people, scenes and so on.

Business Card

It is unlikely this mode will be useful to you. It is designed to capture contact information and store it in a Microsoft contacts database.

Open

Step 4: Take the picture

You can use flash if you need to. Line the image frame boundary up with the region of the field that you want to capture and then use the camera button (soft or your devices) to capture.

As you move the camera to focus, Lens will try to frame objects it detects. It is best to use the camera above the object lying on a flat surface. When you have the region you want in focus you capture your image.

If you don’t want to keep the image at this stage you can delete it immediately and start again.

Crop

There is a crop icon that will allow you to trim anything you don’t want from your image. Since the editing features are limited and not easy to use on a small device, you will benefit from having carefully selected the correct region before capture.

Filter

You can now apply a filter to your image to improve the image or to remove colour if you only need a monochrome image. Filters can be useful in adjusting contrast. You can preview and select filters by swiping left/right and then tapping to select.

Open

Step 5: Save the capture

Depending on the type of image captured you now have different save options.

Save your capture as an image file to your OneDrive. Login to your OneDrive on your computer to access the file.

OR

Save to your device’s Gallery. To transfer the file to your computer, use your phone charging cable to connect your phone to your computer and follow the prompts. Find the images and save them onto your computer. Alternatively, you could choose to email the images to your self from your phone but depending on the size of the images, this may take a while. 

If the capture is of text, you can create a Word document, a PowerPoint document or a PDF on OneDrive, (but note, handwritten text will not always capture well). 

Step 6: Insert image(s) into the answer sheet document

Use the Insert option to insert the images into your answer sheet. You can use any document for your answer sheet, Microsoft Word is recommend as it is freely available to students. For guidance on installing Microsoft Word see Microsoft software for students guide.

Office applications have an Insert tab with a pictures icon. Many other applications have means of reading an image file, but the method will vary by application.

Insert one image per page and resize if necessary.

If you are using a combination of handwritten and typed text, ensure you compile all your responses into one document/file with answers clearly labelled.

Step 7: Check the file size of your answer sheet document.

Save regularly as you add images to your answer sheet.

Ensure you check the file size. Most answer sheets, even if they have multiple images, will easily satisfy the size limit for your submission platform (such as Moodle or WISEflow). However, in rare cases, you may need to compress your image file sizes. If using Microsoft Word, please see Microsoft's guide on reducing image file size.

Step 8: Convert your answer sheet document to PDF (if submitting to WISEflow)

WISEflow submissions must be PDF documents. This is easily done in Microsoft Word, simply click File and select Save As or Export to create your PDF.

Step 9: Submit

Upload your document to the relevant submission portal.