...
The Bold Line CO2 Unit mixes air and CO2 to achieve the desired CO2 percentage. CO2 is supplied from cylinders or the building supply. Air is provided by an Okolab supplied Air Pump or from the building compressed air system.
...
Turning on and setting the temperature of the incubation system
Turn the system on and off using the switch on the left-hand side of the Oko-Touch controller (below, A). Set the temperature by pressing the temperature display and adjusting the set point as shown (B). The actual Oko-Touch display will differ from the diagrams below as the system is also capable of CO2 control.
Setting the CO2 concentration and turning on the supply
Supply CO2 in a similar way by pressing the CO2 display and adjusting the set point.
...