...
- Remove the dust cover and put it on the shelf above the microscope.
- If you are taking brightfield images, turn on the switch at the bottom left of the microscope stand.
- If you are imaging in fluorescence, switch on the ebq100 power supply to the mercury lamp. Refer to the LMCB Light Microscopy Local Rules for the mercury lamp safety rules. Sola Light Engine and press the Light button.
- Switch on the power for the extension lead on the wall. Check that the switch on the extension lead itself is also on. This will power the camera and the computer.
- Switch on the computer (on the floor under the table).
- Log in to the LAS-X user account. The password is lmcb.
- Start the LAS X software.
...