Page Comparison

...

Taking colour images

1. Select Color Mode in the softwareImage dialogue.
   Image Added
2. Set binning to 1x1 for both Image and Live Formats.
3. Set the exposure to 1 ms and set Gain to 1.0.
4. Insert both the N4 and N16 neutral density (ND) filters into the light path and turn the lamp voltage up to 11 or 12. By turning up the lamp and inserting the ND filters the light from the lamp should be the right colour and brightness for your eyes and the camera.
   Image Added
5. Focus on your specimen and redirect the light path to the camera port.
6. Click Live and adjust the camera exposure to avoid saturation.
7. Click the Glow Over Under button to indicate saturation in the image. Pixels in red are too bright. Turn down the exposure until you only have a small number of them
8. Click the same button again to change the Glow Over Under look-up table back to the normal colour view.
9. Find a background area, draw an ROI and proceed to white balance the image.
   For brightfield images, set Image Added
10. Set the white balance using the "draw rectangle" tool and selecting 'white balance' when the options appear.
    
11. Readjust the exposure if you need to.
12. To save, go to 'Open projects', right click on your file or folder, and save.  LAS X will save whole folders of images into one single lif.  If you want individual tifs, use the right click > export option.
    

...