Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 8 Next »

  1. In no particular order turn on UPS1 and UPS2 on the shelf under the microscope by pressing their power buttons.
  2. Turn on Laser Bed 1 on the bench next to the PC by pressing the power button and turning the key from 0 to 1. The power button will emit blue light when it is on.
  3. Turn on Laser Bed 2 on the shelf under the microscope in the same way as above.
  4. Start up the PC.
  • No labels