Page Comparison

Overview

Third party software - video application that supports scheduling, recording, and streaming videos. Also includes interactive polling and Q&A tools.

Lecturecast Resource Centre.

UCL's media portal - video and audio content that allows all UCL staff and students to publish their media content. This can be private to an individual, shared to groups both internal and external, or to an external public audience

UCL guidance on Mediacentral.

Part of Office 365 (www.office.com) - video streaming service, includes the ability to record videos and upload videos (as files from your computer). Teams calls and meeting recordings are stored here automatically. 

UCL guidance is available on Recording in Teams and working with videos in Stream.

Example use cases

Portico registered Module videos e.g.

• introductory video;
• weekly mini-lectures;
• previously recorded lectures.
    

Programme level video.

Special Events recordings and videos for internal UCL purposes, such as training and information.

Video for external audiences, student recruitment, public engagement.

Teams calls and meeting recordings.

Host videos that you want to make available to the entire UCL community (such as a guidance video).

Microsoft Stream supports Microsoft Edge, Internet Explorer 11 (IE11 document mode only), and the current versions of Chrome and Safari.
Not supported on Firefox.

Two video feeds, the use of both is optional. Typically used to record screen and presenter but another configuration might use a webcam feed rigged as a temporary document camera.

Through the browser you can record a presenter but not Desktop screen.

Though the MEDIALecture application you can record Screen, Webcam and Audio combined or individually. 

You can record presenter and Desktop screen for up to 15 minutes. Presenter appears in the bottom corner of recording. 

There is no limit on recording time

A recording made in Stream can be up to 15 minutes long.

A video of a recorded Teams meeting or call or a video file that has been uploaded to Stream will share the same duration of the original recording/event. For example, if the meeting was 1.5 hours duration and the entire meeting was recorded, then the video on Stream will be 1.5 hours.

Video can be trimmed, parts of video can be removed. 

Export allows you to keep the original.

Editing your video in Lecturecast.

Video can be Trimmed (Start and End) or Chopped (removed).

Export allows you to keep the original.

Editing your video in Mediacentral.

Video can be Trimmed (Start and End).

Editing your video in MS Stream.

Add pre-recorded video created using my own video/screencasting tool?

e.g. a video recorded in Powerpoint.

Pre-recorded videos can be uploaded to a Module section or to your personal library.

Common video formats are supported including .mp4, .avi, .mkv, .mov (for a full list see Lecturecast supported formats).

Pre-recorded videos can be added through to Moodle by adding a Media Resource or uploaded directly into Mediacentral.

Common video formats are supported e.g. .mp4, .avi, .mkv, .mov (for a full list see Mediacentral Moodle guidance, step 14).

Pre-recorded videos can be uploaded to Stream. 

 Common video formats are supported e.g. .mp4, .avi, .mkv, .mov (for a full list see Microsoft Stream formats).

The system is set at a 5GB limit, for larger files up to 100GB a user would have to make a request to to admin team.

A request to upload files larger than 5GB should be sent to mediacentral@ucl.ac.uk. 

Lecturecast is integrated with Moodle. Simply, add a Lecturecast activity to add specific videos or a whole section of videos. 

Videos recorded outside of the Lecturecast system can be uploaded and shared in the same way.

Mediacentral is integrated with Moodle. Videos can be added to Moodle by adding a Media Resource, or as a URL embed link. 

Not integrated, but videos can be added as URL links or embed codes.

Not currently as viewing is enabled by linking to a Moodle course's associated Lecturecast section. Once student is enrolled on a linked Moodle course no further log-in is required to view recordings or interactive PP presentations.

Under the Share video options, you can copy a HTML embed code. This code can be added to a Moodle section or page. Students may be asked to login to Mediacentral before video displays. 

How to embed a video on Mediacentral.

Under the share video options, you can copy a HTML embed code. This code can be added to a Moodle section or page. Students may be asked to login to Microsoft Stream before video displays. 

Simply access the video in your personal library or the Module section where you shared it, if you are the owner of the video you can share the video to additional module sections e.g. ECON0001, ECON0002, ECON0003.

Yes, best approach is to upload to Mediacentral, make Personal(Public) and add either the share or embed code to each Moodle course.

Alternatively, add through Media Resource to each Moodle course.

Yes, by adding the share or embed code into each Moodle course.

Its common to have one Lecturecast activity link to the Home section of your module. This will contain all the recordings under you module as they become available.

You can also add additional Lecturecast activity links to any Moodle section, and configure the link to go to a single video (In Lecturecast this is referred to as a 'Classroom'). 

Add a Media Resource or link to any Moodle section as required. 

Create a page in any Moodle section, and embed the relevant videos for that week/topic.

Restrict who sees the video?

Videos you create or have permission to use are restricted to your personal library until you choose to share them. When you share a video, you choose which module course to share to. A single video can be shared to multiple module courses or with individual UCL staff/students.

Video is restricted to the course in which it is added.

Video added to the Mediacentral portal, can be restricted to a URL (Personal (Public), to UCL staff, UCL students or UCL All - staff and students. if you wish to share with a wider audience the content can made public. 

By Default, video is visible to all UCL staff and students. However video can be restricted to specific users or a group of users. Groups must be manually configured in MS Stream, there is no integration with Portico module groups in Moodle. 

See UCL guidance on Permissions in Stream for more details.

If you have content which is sensitive or that you think should be restricted in some way, please contact the Mediacentral team. 

Total number of views, unique views, downloads and average view length.

If a video is shared to a number of modules, the statistics will be unique to each module.

Viewing statistics are integrated with other Lecturecast interaction stats. giving a fuller picture of student participation/engagement.

In the Portal each video shows total number of views.

For analytics, a user can login to Mediacentral and click on My Account > My Admin Area > Analytics and view analytics of all their content.  Help on this can be found hereon the view analytics webpage.

Analytics can be requested from the system admin team.

Within Moodle, analytics can be viewed by a course admin (Details to follow).

The option to allow downloads is off by default but any instructor in a section can enable/disable downloads, including allowing only audio downloads.

In addition the Echo360 mobile app has an off-line mode where students can optionally download chosen recordings to view under low bandwidth conditions - the recordings can only be viewed on the app and are encrypted i.e not re-publishable.

Staff can turn download option on or off for each single recording.

Not currently supported. Video can only be downloaded by Owner.

If Automatic Speech Recognition (ASR) is activated in a given section recordings are transcribed on initial sharing/publishing to that section. An on-line editor is provided for transcript correction and allows the transcript to be applied as captions.

This is a charged for service
Captions can be generated upon request and within Mediacentral there is a plan based on a 3 tier approach  

1.Automatic and corrected by content owner

2.Automatic and corrected by UCL staff

3.Captioning with supplier corrections

Transcriptions can also be created from the captions file, this is also a charged for service.

During upload, select for captions to be created (you'll need to specify a language for the video if it's not automatically detected).

Automatic captions can be edited in MS Stream or using a VTT file editor.

Can a transcription and caption file be added?

Why use captions.

Captions produced externally can be added and corrected using the Transcript Editor in the application in a web browser.  Note as Lecturecast adds a short intro to uploaded videos, captions generated outside of Lecturecast need to take account of this.

Captions produced externally in .vtt or .srt formats can be added and corrected within the caption editor.

A caption file can be added through the upload process or at a later stage.

Automatic captions can be generated as above. 

Otherwise, a caption file can be uploaded. 

Students can submit questions and answers, make notes, bookmark and set confusion flags, all of which which can be automatically referenced to a specific time in the video. 

Assessment results are not stored in Moodle so only suitable for formative assessment.

Videos added to Moodle through adding a Media Resource do not allow for interaction. 

Videos added to Mediacentral portal and/or linked to from Moodle can have an optional discussion forum beneath them which can be used for discussion and questions. 

Videos have a Comments section beneath them (which can be disabled by a video owner).

Quizzes can be added to specific moments in the video. Assessment results are not stored in Moodle so only suitable for formative assessment.