...
Technical Specifications
Objective lenses
The objective lenses in the table below are installed in non-adjacent positions in the standard 6-position nosepiece. Objective lenses are not installed in all positions to prevent damage to adjacent lenses as theĀ objective lens is focused.
Position | Magnification | Type | NA | Immersion | WD |
---|---|---|---|---|---|
1 | 20x | HC PL APO CS2 | 0.75 | Air | 0.62 |
2 | Empty | ||||
3 | 40x | HC PL APO CS2 | 1.3 | Oil | 0.24 |
4 | Empty | ||||
5 | 63x | HX PL APO CS2 | 1.4 | Oil | 0.14 |
6 | Empty |
There is also a 10x HC PL APO CS2 0.4 NA air lens that can be installed in the standard nosepiece if required.