...
The objective lenses below have a larger M32 thread. To install these lenses the standard nosepiece must be removed from the microscope and replaced with a single-position nosepiece. Hence only one of these lenses can be installed at any one time. They have motorised correction collars which can be adjusted from within the software to correct for refractive index mismatches.
25x HC IRAPO L motCORR 1.0 Water dipping 2.6. 507704
25x HC FLUOTAR L motCORR VISIR 1.0 Clarity 6 507703
Magnification | Type | NA | Immersion | WD | Part Number |
---|---|---|---|---|---|
25x | HC IRAPO L motCORR | 1.0 | Water dipping | 2.6 mm | 507704 |
25x | HC FLUOTAR L motCORR VISIR | 1.0 | Clarity | 6 mm |
Magnification | Type | NA | Immersion | WD | Part Number | ||||||
---|---|---|---|---|---|---|---|---|---|---|---|
25x | HC IRAPO L motCORR | 1.0 | Water dipping | 2.6507704 | 25x | HC FLUOTAR L motCORR VISIR | 1.0 | Clarity | 6 | 507703
Note that the 6 mm working distance of the Clarity lens will mean that any sample imaged using this lens will most likely have to be mounted in a deep vessel.