...
The objective lenses in the table below are installed in non-adjacent positions in the standard 6-position nosepiece for objective lenses with M25 threads. Objective lenses are not installed in all positions to prevent damage to adjacent lenses as the objective lens is focused.
Magnification Magnification | Type Type | NA NA | Immersion WD | WD (mm) | Part Number Number |
---|---|---|---|---|---|
20x | HC PL APO CS2 | 0.75 | Air | 0.62 mm | 506517 |
40x | HC PL APO CS2 | 1.3 | Oil | 0.24 mm | 506426 |
63x | HC PL APO CS2 | 1.4 | Oil | 0.14 mm | 506350 |
There is also a 10x HC PL APO CS2 0.4 NA (P/N 506424) air lens that can be installed in the standard nosepiece if required.
...
Magnification | Type | NA | Immersion | WD (mm) | Part Number |
---|---|---|---|---|---|
25x | HC IRAPO L motCORR | 1.0 | Water dipping | 2.6 mm | 507704 |
25x | HC FLUOTAR L motCORR VISIR | 1.0 | Clarity | 6 mm | 507704 |
Note that the 6 mm working distance of the Clarity lens will mean that any sample imaged using this lens will most likely have to be mounted in a deep vessel.