...

It doesn't matter which one you turn on first. Press the power button on the front of the PC and switch on the Supply Unit by turning on the Power and Laser switches on the side of the Supply Unit and turning the key 1/4 turn clockwise to the vertical position. The PC can be turned on without switching on the rest of the system so you can analyse or copy data.

Slide down the hatch on the front of the microscope chamber.

Check for obstructions that could damage the microscope

Make sure there is no sample on the stage . Turn on the LED if or anything on or around the microscope that could cause damage during microscope initialisation.

To check the stage, slide down the hatch on the front of the microscope chamber. If it is hard to see inside the chamber. Rotating , turn on the LED by rotating the white dial clockwise on the top of the chamber will turn on the LEDclockwise. You will hear a click when the switch turns on, after which the dial increases the brightness of the light. The LED . It can also be switched on and off using the foot switch. If you turn the dial on and see no light, try pressing down the foot switch.

...