...
 |
| Ibidi µSlide adapter (left) and 35 mm adapter modified for Mat-Tek dishes (right) |
...
Supplying CO2 to a specimen adapter
The specimen adapters above are all compatible with the CO2 work head (A in the image below). There are two locating pins on each of the adapters that slide into holes in the work head. Make sure the CO2 supply valve (the black and red thing) is on the right (nearest to the humidification bottle and trap). Note that the glass lid just sits on top of the work head so if you tip it over it will fall off and break.
- Put the CO2 work head on your specimen with the valve to the right
- Connect the Luer tube from the CO2
 |
| A. The CO2 work head. B. Luer adapter for the gas supply. C. Push the red catch so that the Luer adapter will slide into the work head. |