...
 |
| Ibidi µSlide adapter (left) and 35 mm adapter modified for Mat-Tek dishes (right) |
...
Connecting the CO2 supply to
...
the specimen adapter
The specimen adapters above are all compatible with the CO2 work head (A in the image below). There are two locating pins on each of the adapters that slide into holes in the work head. Make sure the CO2 supply valve (the black and red thing) is on the right (nearest to the humidification bottle and trap). Note that the glass lid just sits on top of the work head so if you tip it over it will fall off and break.
...