...
The stage adapters below are fixed to the NanoscanZ using four thumbscrews. It can be fiddly removing and screwing in the thumbscrews so take care not to drop them as they may get caught in the microscope mechanism. The universal adapter on the right is suitable for a variety of specimen formats (e.g. slides, Lab-Tek I, 35 mm dishes) but is not compatible with the CO2 supply. The multi-well plate adapter must be used for procedures requiring CO2 in combination with smaller specimen adapters that fit the CO2 work head.
...
 |
| A. The CO2 work head. B. Luer tube for the gas supply. C. Push the red catch so that the Luer adapter will slide into the work head. |
Supplying CO2 to the work head
Turn on one of the CO2 valves on the wall adjacent to the Vox. Choose 5% or 10% CO2 depending on your medium. The water in the humidifier should start to bubble.
 |
| Vox CO2 wall valves |