| Info | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
The instructions below assume that the standard six-position nosepiece is fitted to the DM6 microscope with three standard M25 thread lenses installed: 20x, 40x and 63x. The instructions also assume that the SuperZ Galvo stage is fitted. If an M32 thread lens or an alternative stage is installed, then different procedures will apply.
...
Check for obstructions that could damage the microscope
...
| title | New Chamber |
|---|
The microscope chamber has been changed. See image below. The blacked-out front panel now slides aside rather than up and down (A). There is a clear panel under the blacked out one that also slides aside (B). The entire front can be opened using the handle (C). There a switch to change between white and red LEDs inside the chamber.
...
Make sure there is no sample on the stage or anything on or around the microscope that could cause damage during microscope initialisation.
...