Info | ||||||
---|---|---|---|---|---|---|
| ||||||
|
The instructions below assume that the standard six-position nosepiece is fitted to the DM6 microscope with three standard M25 thread lenses installed: 20x, 40x and 63x. The instructions also assume that the SuperZ Galvo stage is fitted. If an M32 thread lens or an alternative stage is installed, then different procedures will apply.
...
Check for obstructions that could damage the microscope
...
title | New Chamber |
---|
...
Make sure there is no sample on the stage or anything on or around the microscope that could cause damage during microscope initialisation.
...