...
There are three inserts for the Galvo Z stage, although in practice you'll probably only need to use two at most. The main ones are the universal adjustable insert that will take slides, dishes, Lab-tek chambers etc and the multi-well plate insert. The universal insert should be fitted by default since it suits the most users. If you use the insert for the multi-well plate then you MUST replace the universal adjustable stage insert once you have finished. The screws for the universal insert are very small so you MUST be careful not to drop any into the microscope stand; particularly under the objective lens nose-piece. If a screw rolls under the nose-piece then contact a member of light microscope staff immediately.