Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Introduction

Table of Contents
typeflat

Note
titlePlease read!

If you select one of the specialist lenses in Agendo, or require incubation or CO2, then you must book the microscope in working hours (0900 - 1700) and leave a 30-minute gap before and after your session so facility staff can be available to swap the necessary equipment. Facility staff will receive an email when you book the machine and will be alerted to your requirement.

Expand
titleTechnical information and user guides

Technical specifications (objective lenses, lasers, etc.)

Start-up procedure

Controlling the microscope with the STP8000

Mark & Find using LAS X Navigator

Creating a Focus Map in LAS X Navigator

Image Added

Location: Medawar Building. Room 2.19B.

The Leica Microsystems Stellaris 8 DIVE (Deep In-Vivo Explorer) has the following features:

  • A fixed-stage upright DM6 microscope stand
  • The choice of standard objective lenses and special long-working distance dipping lenses for imaging deep into live and cleared specimens
  • A dual-beam Coherent Discovery multiphoton laser with a tunable laser line and a fixed 1040 nm laser line
  • A range of visible lasers for confocal imaging
  • Spectrally tuneable imaging with non-descanned detectors using the 4Tune system.

Technical Specifications

Objective lenses

The objective lenses in the table below are installed in non-adjacent positions in the standard 6-position nosepiece for objective lenses with M25 threads. Objective lenses are not installed in all positions to prevent damage to adjacent lenses as theĀ  objective lens is focused.

...

  • .