Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 3 Next »

  1. Make sure to save all your data.

  2. Take your sample off the microscope stage and clean all lenses you have been using for your experiments thoroughly with the Whatman lens cleaning tissue provided.

  3. Close the Leica LAS X software and shut down the PC

  4. Turn the laser emission key in the OFF position, then turn off the switches next to it from right to left (Laser Power, Scanner Power, PC – Microscope).

  5. If you used the STED laser turn the STED laser key in the OFF position.

  6. Turn off the FL6000 mercury halide lamp.
  • No labels