/
Leica STED - Shutdown Instructions

Leica STED - Shutdown Instructions


  1. Make sure to save all your data.

  2. Take your sample off the microscope stage and clean all lenses you have been using for your experiments thoroughly with the Whatman lens cleaning tissue provided.

  3. Close the Leica LAS X software and shut down the PC

  4. Turn the laser emission key in the OFF position, then turn off the switches next to it from right to left (Laser Power, Scanner Power, PC – Microscope).

  5. If you used any of the the STED lasers, turn the STED laser keys 1/4-turn anticlockwise to the OFF position.

  6. Turn off the EL6000 mercury halide lamp.

Related content

Leica STED - Start-up Instructions
Leica STED - Start-up Instructions
More like this
STED imaging guide
STED imaging guide
More like this
Nikon N-STORM - Quick Shutdown Instructions
Nikon N-STORM - Quick Shutdown Instructions
More like this
LSM 900 Upright start-up and shut-down procedure
LSM 900 Upright start-up and shut-down procedure
More like this
Leica STED instructions
Leica STED instructions
More like this
Zeiss ELYRA PS.1 - Quick Shutdown Instructions
Zeiss ELYRA PS.1 - Quick Shutdown Instructions
More like this